English

THE PUSH LEVER AND TRIGGER MUST MOVE SMOOTHLY. Trigger

Push lever

Do not connect

air hose

(2) Adjust the air pressure to 70 psi (4.9 bar

5 kgf/cm2).

Connect the air hose.

 

Do not load any nails in the Nailer.

 

Set the switching device to the upward position (SINGLE ACTUATION MECHANISM). (Set the switching device to the upward position completely as shown in the diagram. Otherwise, it will not operate properly.)

Upward position

Switching Device

THE NAILER MUST NOT LEAK AIR.

(3)Remove the finger from the trigger and press the push lever against the wood.

THE NAILER MUST NOT OPERATE.

Depress push lever

Do not pull trigger

14