Magazine

Nail holder

For 7/8", 1" and

 

1-1/4" (22 mm,

 

25 mm, 32 mm)

 

For 1-1/2" (38 mm)

3

 

For 1-3/4" (45 mm)

1

 

 

2

 

Plate

NOTE: Before loading nails in the magazine, adjust the nail holder. If the magazine cover is forcibly closed without adjusting the nail holder correctly, the nail holder may be damaged.

(3)Place the nail coil in the magazine.

Insert the first nail into the magazine opening.

Magazine opening

Magazine

First nail

Nail

(4)Close the magazine cover.

(5)1 Uncoil enough nails to reach the driving hole.

2 Insert the first nail into the driving hole and the second nail between the two pawls of the feeder.

3 Fit the nail heads in the guide slot.

English

guide and knob, turn the nail guide clockwise while pressing the knob downward, and then close the nail guide completely.

Knob 4

 

4

Nail guide

Magazine cover

 

(6) Lock the knob completely.

The Nailer is now ready to operate.

<NV45AE(S)>

(1)Press the magazine stopper and open the magazine cover.

Magazine stopper

Magazine cover

(2)Adjust the position of the nail holder according to the nail length.

The nail will not feed smoothly if the nail holder is not correctly adjusted.

1Turn the nail holder about 90 degrees counterclockwise.

2Move the nail holder up and down to align the top

of the nail holder with a mark on the holder shaft in accordance with the length of the nails being

Driving hole

Guide surface Guide slot

used.

3 Turn the nail holder 90 degrees clockwise until

First nail

2 3

1

4

Nail guide

Feeder

2

 

Pawl

NOTE: Be careful not to deform the collated wires and not to disengage the nails with the guide surface. Otherwise, the nail guide will not close correctly.

4Pulling the nails to the right

After checking and making sure that the magazine cover is closed, hook your fingers on the nail

you hear "click".

For 1-1/4"

For 7/8" and 1"

For 1-1/2" and 1-3/4"

Magazine cover

Mark

Nail holder

NOTE: Before loading nails in the magazine, adjust the nail holder. If the magazine cover is forcibly closed without adjusting the nail holder correctly, the nail holder may be damaged.

— 13 —