English

USING THE SHINGLE GUIDE

The shingle guide can be used to control shingle spacing. Adjust the shingle guide in the following order.

1DISCONNECT AIR HOSE FROM NAILER

2Loosen the hex. socket hd. bolt with the accessory

Allen wrench.

3Place the shingle guide against the bottom of the first row of shingles.

4Adjust the distance between the outlet and the shingle guide to the proper shingle exposure by sliding the shingle guide.

5Tighten the hex. socket hd. bolt. Second row

First row

Outlet

Proper shingle

3

exposure

 

 

4

 

1 Disconnect

 

air hose

Shingle guide Hex. socket

 

hd. bolt

NOTE:

￿The proper shingle exposure will depend on the type of shingle and the manufacturer's specifications.

￿The shingle guide is not to be utilized as an indicator of nail location.

ADJUSTING THE NAILING DEPTH

To assure that each nail penetrates to the same depth, be sure that:

1)the air pressure to the Nailer remains constant (regulator is installed and working properly), and

2)the Nailer is always held firmly against the workpiece. If nails are driven too deep or shallow into the workpiece, adjust the nailing in the following order.

1 DISCONNECT AIR HOSE FROM NAILER

Adjuster

15

Disconnect air hose

2If nails are driven too deep, turn the adjuster counterclockwise while pulling it downward. When the adjuster is released, it returns upward.

Furthermore, turn the adjuster until it reaches a position where it gets fixed with a clock.

Turn adjuster

Too deep

Flush

2

If nails are driven too shallow, turn the adjuster clockwise while pulling it downward.

When the adjuster is released, it return upward. Furthermore, turn the adjuster until it reaches a position where it gets fixed with a clock.

Turn adjuster

Too shallow

Flush

2

The adjuster can be fiexed each at 1/4 rotation. The adjuster moves approximately 0.25mm per 1/4 rotation.

3Stop turning the adjuster when a suitable position is reached for a nailing test.

4Connect the air hose.

ALWAYS WEAR EYE PROTECTION. Perform a nailing test.

5DISCONNECT AIR HOSE FROM NAILER.

6 Choose a suitable position for the adjuster.

— 16 —