Hitachi P50A402, P42A202 Channel Manager, Signal Meter, Auto Channel Scan, Channel List

Channel Manager

Select CHANNEL MANAGER to set your Antenna options, run Auto Channel Scan, Check Signal Meter and Set Channel List.

1.Press CURSOR PAD , to highlight functions.

2.Press the SELECT button or CURSOR PAD to select.

		Video
		Audio
		Channel Manager
	+	Locks
		Timers
		Setup
		Move	SEL Select
	Channel Manager
	Signal Meter
OR	Auto Channel Scan
	Channel List
	Move	SEL Select

Signal Meter

Select SIGNAL METER when using an indoor or outdoor antenna. This feature will show the signal strength and peak values of the Antenna signal to help you adjust your antenna to optimize signal reception.

Channel Manager

Signal Meter

Channel 3-1

Strength 91

Peak 91

SNR 10

	Close
Move	SEL Return

Use the CURSOR PADS buttons , and the SELECT button to highlight and select CLOSE to exit.

NOTE	The Signal Meter will not be available (grayed out)
	when watching analog channels.

Auto Channel Scan

This feature will automatically store active Analog and Digital channels in Auto Channel Scan memory.

Channel Manager

Auto Channel Scan

Source		Air
Auto Channel Scan		Start	Reset
Move	SEL Return

1.Use the CURSOR buttons or to highlight AIR, CABLE (1) or CABLE(2) source.

2.Press the CURSOR buttons or to highlight the START or RESET option.

3.Press the SELECT button to select.

NOTE	If certain channels are poor or not possible in cable(1)
	mode, set cable source to cable(2) by using the
	CURSOR buttons or .

Channel List

This function allows you to review which channels are labeled (ID), which have been added to CHANNEL MEMORY (SKIP), which are protected by LOCK and which are your FAVORITE (FAV)

CHANNELS.

Channel Manager

Channel List

FAV	CH#	Skip	Lock	ID
	3-1	On	Off	------
	4	On	Off	------
	5	On	Off	------
	6	On	Off	------
	7	On	Off	------
	8	On	Off	------
	9	On	Off	------
	10	On	Off	------
No Info		--:--	AM --:--	AM

Move Return INFO DETAIL

1.Use the CURSOR PAD to navigate the Channel List.

2.Press the SELECT button to select ON or OFF on the SKIP and LOCK columns.

3.To select LOCK column, input the access code.(Default access code: 0000)

4.Press the FAV button to set or remove the FAVORITE settings.

5.Press the EXIT button to return to normal viewing.

NOTE	The Channel List cannot be updated by only
	changing the cable source. Auto Channel Scan must
	be performed for the Channel List to be updated.

IMPORTANT NOTICE

United States federal law requires broadcasters to stop transmitting analog (non-digital) television signals after February 17, 2009. Accordingly, this TV’s analog tuner will not be capable of receiving over-the-air analog television broadcasts after such analog broadcasts are no longer available.

After February 17, 2009, this TV’s analog tuner will continue to work with compatible cable and satellite TV systems, gaming consoles, VCRs, DVD players and other similar products.

Both before and after February 17, 2009, this TV’s digital tuner will receive available over-the-air digital television broadcasts using an antenna and other digital television broadcasts using compatible cable, satellite or other digital television system connections.

Please review this Operating Guide for further information regarding such connections.

Hitachi supports the DTV transition and as a member of the DTV Transition Coalition urges consumers to visit these web sites for interactive guides and further detailed information:

•	www.dtvtransition.org	•	www.dtv2009.gov
•	www.myceknowhow.com	•	www.youtube.com

ON-SCREEN DISPLAY

33