Hitachi P42H4011A, P50H4011A important safety instructions Front Panel Controls

Front Panel Controls

FRONT VIEW

First time use

PUSH TO OPEN CONTROL DOOR

￿ ￿

￿

			FRONT PANEL CONTROLS
UPGRADE CARD
(SERVICE USE ONLY)
PUSH EJECT
￿	￿	￿	￿ ￿ ￿ ￿ ￿

￿	FRONT POWER button	￿ POWER button
	Press this button to turn the Plasma Television	Television MAIN POWER button
	ON/OFF. It can also be turned ON/OFF by remote	This power button is for the complete system, and
	control. The “MAIN POWER” button must be at	must be turned ON/OFF manually. It is
	stand-by mode.	recommended to leave the “MAIN POWER” to ON
		condition (lights red) for stand-by mode.
￿	MENU/SELECT button
	This button allows you to enter the MENU, making	The Main Power
	it possible to set TV features to your preference	button is located
	without using the remote. This button also serves	on the broadside
	as the SELECT button when in MENU mode.	bottom, under the
		mark " ".

￿HDMI-FRONT

Use the front HDMI input for extrenal devices such as Set-Top-Boxes or DVD players equipped with an HDMI output connection (see page 15 for reference).

￿INPUT/EXIT button

	Press this button to access the INPUT menu.	NOTE: When the “MAIN POWER” button is set to
	Press again to exit the MENU mode.	OFF or the TV is unplugged, the clock will
		stop and may eventually reset itself.
￿	CHANNEL selector
	Press these buttons until the desired channel	￿ Upgrade Card
	appears in the top right corner of the TV screen.	This card slot is for future software upgrades.
	These buttons also serve as the cursor down ( )	Hitachi will notify you if a software upgrade is
	and up ( ) buttons when in MENU mode.	required for your TV. In order to receive written
		notification, please complete and return your
￿	VOLUME level	warranty card.
	Press these buttons to adjust the sound level. The
	volume level will be displayed on the TV screen.
	These buttons also serve as the cursor left ( ) and
12	right ( ) buttons when in MENU mode.