Hitachi P42H4011A, P50H4011A Remove these 2 screws First to separate the TV

First time use

How to set up your new HITACHI Plasma Television

SETTING FOR WALL MOUNTING ON 42" MODELS

STEP (1) :

Please locate the STAND METAL on the back of the TV . This metal is use to hold the TV and the Base ; so it needs to remove 6 screws from the STAND base in order to separate the TV from the Base.

STAND METAL

STEP (2):

Please remove the 2 screws of the STAND metal from the TV, then remove 4 screws that hold the TV STAND BASE; now the TV STAND can be separated from the TV.For dimensions of the WALL MOUNT assembly please refer to page 60.

STAND METAL 2 SCREWS

Remove these 2 screws

first to separate the TV	TV STAND BASE
from the stand metal.
	Remove these 4 screws
Then put these 2 screws
	to separate the TV from
back to the TV.
	the stand base.

For Model P42H401, P42H401A, P42H4011 and P42H4011A

CAUTION- This Plasma Display Panel for use only with Hitachi WM07S Wall Mount. Use with other Wall Mount is capable of resulting in instability causing possible injury.

NOTE: Use the specified WALL MOUNT base for the Plasma TV depending on the size of your TV. Please access our web site at: www.hitachi.us/tv for recommended accessories for your tv.

8