Setup
Set The Inputs
Use this feature to give a name to any of the video inputs.
1. Press the CURSOR PAD , to highlight the video inputs.
2.Press the CURSOR PAD , to select your choices.
Note: The inputs labeled Gray out (Skip) or Hide (Skip) are disabled in the INPUTS selection.
OR
INPUT 3 Auto Link
Use this function to automatically turn the TV on and tune to INPUT 3 when it detects a video signal to INPUT 3.
Setup
Set The Inputs
Input1 : ****
Input2 : ****
Input3 : ****
Auto Link : Off
HDMI1 : ****
HDMI2 : ****
HDMI
Move SEL Return
1.Use the CURSOR PAD or to highlight the AUTO LINK option and or to select between the Off and Auto settings.
Auto
When AUTO is selected, the TV will turn on and switch to INPUT 3 automatically, when the INPUT 3 input device is turned on. This is convenient when you want to watch a movie with your VCR, laserdisc player, or DVD player.
Off
Select OFF to disable this function.
2.Press EXIT to quit menu or select SET THE INPUTS to return to previous menu.
NOTE: 1. Once the TV has been turned on using the AUTO LINK feature, it must be reset before AUTO LINK is used again. To do this, turn your VCR, laserdisc, or DVD player OFF. This feature is now reset and will turn on your TV as described above.
2. If no remote control button is pressed after the TV is turned on by AUTO LINK, the TV will automatically turn off after three hours.
54
