Video
Select VIDEO to adjust picture settings to your preference. You can independently customize each of the video inputs to increase viewing performance and pleasure depending upon the video program being viewed. If RESET is selected, only the selected input will reset to initial conditions.
Video
Audio
TV Guide On Screen
Channel Manager
Locks
Timers
Setup
Power Swivel
Move SEL Select
Color
Use this function to adjust the level of color in the picture.
Tint
Use this function to adjust flesh tones so they appear natural.
Sharpness
Use this function to adjust the amount of fine detail in the picture.
Color Temperature
Set this to High for cooler color with more blue, set to Medium for more natural color, set to Standard for accurate color or set to D. Cinema for color to match the cinema accurately.
Light Sensor
When on, the light sensor will automatically adjust the contrast setting according to brightness of the room. Select off to manually
OR
Video
Picture Mode
Contrast
Brightness
Color
Tint
Sharpness
Color Temperature
Light Sensor
Black Enhancement
Move SEL Select
Air
Dynamic 100%
50%
50%
0
50%
High
Off
High
adjust the contrast setting.
NOTE When the Light sensor function is set to ON, Contrast Mode (see below) will be disabled (grayed out).
Black Enhancement
Use this function to enhance the shadow detail in dark scenes using the settings off, low, middle and high.
NOTES • If CONTRAST is selected, you are adjusting CONTRAST. The additional menu items BRIGHTNESS, COLOR, TINT, and SHARPNESS can be selected and adjusted in the same
ON-
Picture Mode
Use this function to choose from automatic picture settings to optimize your TV’s performance.
1. | Use the CURSOR buttons or to highlight and select |
| PICTURE MODE settings (Dynamic, Day or Night). |
2. | Then press the SELECT button to set the mode and return to |
| the Video menu or press EXIT to quit menu. |
manner.
•It may be necessary to adjust TINT to obtain optimum picture quality when using the COMPONENT VIDEO
•CABLE and AIR share a Video setting. Also, each of the video inputs have their own independent settings.
SCREEN DISPLAY
3. There are 3 Picture Modes available : Dynamic, Day and Night |
mode. Dynamic is the factory preset mode for RETAIL Energy |
Saving Mode and Day is the factory preset when HOME Energy |
Saving Mode is used (refer to page 45). This can be changed |
by adjusting any video setting to your desire conditions. Day |
can be used as a second video setting for daytime viewing. |
Night is set to optimize programing during nigthtime. |
Other Video Menu Settings Adjustment
Use the CURSOR PAD 
or 
to highlight the function to be adjusted.
Video
Black Enhancement
Contrast Mode
Noise Reduction
Cross Color NR
MPEG-NR
MPEG-NR
Auto Movie Mode
Color Space
Cinema48
Lip Sync
Move SEL Select
Air
High
Dynamic
Off
Off
Off
Off
Vibrant
Off
0
1.Press the SELECT button or the CURSOR PAD 
to select the function settings.
2.Press the CURSOR PAD 
or 
to adjust the function.
3.Press MENU to return to main menu.
4.Press EXIT to quit menu.
Contrast
Use this function to change the contrast betwen black and white levels in the picture.
Brightness
Use this function to change the overall brightness in the picture.
Contrast Mode
Use this function to choose between two Contrast Mode settings. Set to DYNAMIC for more contrast and set to NORMAL for a more
cinematic film like image.
Noise Reduction
The NOISE REDUCTION function automatically reduces conspicuous noise in the picture without degrading picture quality. Set NOISE REDUCTION to OFF if you see individual block in the
picture.
Cross Color NR
The Cross Color NR (Noise Reduction) function automatically reduces cross color noise in the picture. Choose between two different levels (Low, High) or select OFF to disable this function.
33
