Hitachi P50V702 DVI to Hdmi Input, Connecting AN External Audio Amplifier

Rear Panel Connections

CONNECTING AN EQUIPMENT SOURCE WITH HDMI OR DVI CAPABILITY TO HDMI 1, HDMI 2

1.Connect the HDMI or DVI to HDMI connection cable from the output of the HDTV set top box or DVD player to the HDMI input as shown on the Rear panel right below figure.

2.With DVI output, connect the audio cables from the AUDIO OUT jack of the HDTV set top box or DVD player to the Rear Panel INPUT 1 or 2 AUDIO jacks as shown on the right.

3.Press the INPUT button, then select HDMI 1 or 2 to view the program from the HDTV SET-TOP BOX or DVD player.

NOTES • Completely insert the connection cord plugs when connecting to rear panel jacks. The picture and sound that is played back will be abnormal if the connection is loose.

•When using a DVI to HDMI cable, connect the Audio Out L and R cables at the same input (1, 2) as your

HDMI input (1, 2).

•The HDMI input on HDMI 1, 2 and 3 contains the copy protection system called High-bandwidth

Digital Content Protection (HDCP). HDCP is a cryptographic system that encrypts video signals when using HDMI connections to prevent illegal copying of video contents.

•HDMI is not a “NETWORK” technology. It establishes a one-way point-to-point connection for delivery of uncompressed video to a display.

•The connected digital output device controls the HDMI interface so proper set-up of device user settings determines final video appearance.

HDMI Input

TV REAR PANEL

HDMI DIGITAL

OUTPUT CAPABILITY

DVD Player/ Recorder

HDMI OUT

[HDMI] [HDMI]

TV REAR PANEL	DVI to HDMI Input
		DVI DIGITAL
		OUTPUT CAPABILITY
		DVD Player/ Recorder
		DIGITAL OUTPUT
	[HDMI]	[DVI]	Audio Output
			L	R
		(White)		(Red)

FIRST TIME USE

CONNECTING AN EXTERNAL AUDIO AMPLIFIER

To monitor the audio level of the Plasma TV to an external audio amplifier, connect the system as shown on the right. The “OPTICAL OUT” from the Rear Panel is a fixed output. The Volume of the amplifier is controlled by the amplifier, not by the Plasma Television.

The OPTICAL OUT terminal outputs all audio sources to equipment with Optical IN capability.

1.Connect an optical cable from the Optical out to the Optical input of a separate Stereo System Amplifier as shown on the

Rear Panel on the right.

TV REAR PANEL

Optical cable

OPTICAL

IN

STEREO SYSTEM

AMPLIFIER

NOTES	• Completely insert the connection cord plugs when connecting to rear panel jacks. The picture and sound that is played
	back will be abnormal if the connection is loose.

•Cable plugs are often color-coded. Match colors of plugs and terminals, i.e. connect red to red, white to white, etc.

•To return to the last channel viewed, select CABLE or AIR from the INPUTS menu.

17