How To Install Your New Hitachi Plasma Television

WALL MOUNTING SETUP

STEP (1) : REMOVE THE TABLE TOP STAND FROM THE PLASMA TELEVISION

Please remove the 4 screws shown below in order to separate the TV from the Table Top Stand. Now the Table Top Stand can be separated from the TV. Useful dimensions for the WALL MOUNT assembly are in page 53.

4 SCREWS

TABLE TOP STAND

STEP (2) : INSTALL THE WALL MOUNT BRACKETS ON THE PLASMA TELEVISION USING 4 SCREWS.

Screw Mounting Holes (4 places). Don't use the original screws (A) that comes in the TV for the Wall Mount Bracket. The length is not long enough.

Wall Mount Brackets

For Wall Mount assembly; please refer to the Installation Manual of the Wall Mount Unit.

Screw Length (A)

Insertion length (B)

Spring Washer (C)

Plane Washer (D)

Wall Mount Bracket (E)

Example :

A = B+C+D+E

A: 13~15 mm.

B: 9~11 mm.

C: 1 mm.

D: 1 mm.

E: 2 mm.

The screw type :Theread ISO M6 (Metric type, do not use Standard type).

CAUTION

Insertion length (B) of the screws must be within 9~11 mm. If the length is less than 9mm, the weight can not be maintained. If the length is more than 11mm, a space is created between the Wall Mount Bracket and the Plasma Television. This length is very important.

STEP (3) : TIPS TO CONSIDER FOR THE LOCATION OF THE PLASMA TELEVISION.

 

 

 

More than

 

 

 

30 cm (1').

More than

Keep

10 cm (4").

more than

 

 

 

2 cm (0.8")

 

 

 

away from

 

 

 

the wall.

 

 

 

 

 

 

 

 

 

•• Do not block the ventilation holes. In

CAUTION

addition please keep a certain distance around

and make sure not to obstruct ventilation.

Blocking the ventilation holes might cause fire or defect.

•• If you purchased the Wall Mount unit, please ask for a professional installer. Do not install by yourself.

•• This plasma unit features an advanced ventilation system configured for vertical installation. A knowledgeable and experienced professional technician can perform other mounting or installation orientations (e.g., horizontal, tilted) provided that you specifically inform the technician of the unit's specialized ventilation needs. Call 800-HITACHI for additional info and guidance.

Although this Plasma Display Panel can be installed using a variety of third party wall mounting

CAUTION

brackets/devices, such third party brackets/devices have not been tested or approved by Hitachi for use or

compatibility with this Plasma Display Panel. Accordingly, Hitachi accepts no responsability or liability for

 

 

any injuries or property damage resulting from the use of such third party brackets/devices. Hitachi strongly

advices that any installation of this Plasma Display Panel using wall mounting brackets/devices be performed only by a qualified and experienced television installation technician who has completed a thorough evaluation of:

a)the weight-bearing strength and stability of the intended wall mount surface; and

b)the weight-bearing strength and compatibility of the intended wall mount brackets/device.

8

Page 8
Image 8
Hitachi P50V702 important safety instructions Wall Mounting Setup