Hitachi RU-3400JY/VR S10 operating instructions Function Switch Operating procedure Gain and black

Item	Function	Switch			Operating procedure
no.
１７	Gain and black	PAINT ENABLE	・Gain and black adjustment with
	adjust
				PAINT ENABLE		switch on
				Adjustable by control
		-GAIN-
			・Setting		PAINT ENABLE		to off returns

				-BLACK-			pedestal control to center detent position.
	G.gain/C.temp						Set to C.Temp to operate the G.Gain control as
		G.GAIN/C.TEMP
	adjust						follows.
							Turn clockwise to raise blue and lower red gain.
							Turn counter-clockwise raise red and lower blue gain.
							When switch is set to G.Gain:
							Turn clockwise to simultaneously lower red and blue
							gain.
							Turn counter-clockwise to simultaneously raise red and
							blue gain.
１８	Detail adjustment				-DTL-		・Detail level can be adjusted by turning the
							control.
１９	Iris adjustment			-IRIS-			・Iris adjustment. When using joystick ,operate by
							up and down movement.
							・During auto iris, joystick up&down or manual iris
	Auto iris on/off						trimmer control can be used for fine adjustment.
			AUTO IRIS				・Auto iris on/off is selected.
２０	Iris F value						Set as below according to camera usage
	indication				IRIS		mode.
							(1) Normal use
						･	Lens F value is indicated.
									–
								1.4		22	CL

(2)Camera power supply off

00

(3)The lens cable is open oo

２１ Master black	-MASTER BLACK- ・Master black can be adjusted by the mounted
	master control knob for JY type.
adjust	・ Master black can be adjusted by Variable
	Register for VR type.

30