Hitachi RU-3400JY/VR S10 CTL Value, Level, DTL Totl, Dtl, Ldpp Freq, Crisp / Source CR V-CR SRC

Item	Function		Switch			Operating procedure
no.
１ ６	Manual adjustment				・Select adjustment items with the manual
					control section switches. The display
					section shows the adjustment item and
					value.
					・Use the rotary encoder to adjust the items
					for optimum values.
	* Adjustment				・When the			switch is on, the
		CTL VALUE				CTL VALUE
	value display				adjustment value is displayed from -100 to
					+100.
					【 Display example】
						GAIN
						-20	0	+10
1	Detail Adjustment				【 Display】
							LEVEL
	(1)DTL LEVEL					DETAIL
			DTL	1
						TOTL	H	V
					TOTL: Total detail level adjustment
					H: H detail level adjustment
					V: V detail level adjustment
	(2)LEVEL DEP /				・Press again the switch for the following
			DTL	2
	BOOST FREQ				display.
						LEVEL-DEP / FREQ
						LDPP		FREQ
					LDPP: Dark component noise due to detail
					reduced
					FREQ: Adjusts detail boost frequency (13 M to 19
					M).
	(3)CRISP /				・Press Again the switch for the following
			DTL	3
	DTL SOURCE				display.
						CRISP / SOURCE
						H-CR V-CR		SRC
					H-CR: Noise component reduction due to H.
					detail.
					V-CR: Noise component reduction due to V. detail.
					SRC: Detail signal source (R,RG,RGB) selection.

16