Hitachi UT32A302W manual CONNECTION continued, Connect your Equipment to the Monitor continued

CONNECTION (continued)

2. Connect your Equipment to the Monitor (continued)

Connecting to Equipment Having a HDMI Output Terminal

HDMI-Interfaced System

With “HDMI Control” function, you can interface the connected equipment through the HDMI terminal automatically if the connected equipment meets an industry standard “HDMI CEC (Consumer Electronics Control)”. Please check if the connected equipment supports HDMI CEC before using this function.

			Function
1.	Press the	button.	HDMI Control
			Auto Input Change		Off
			System Standby		Off
2.	Select “Function” menu.		AV Center Control		On
			Select	Return	Exit
3.	Select “HDMI Control”.

4.Select “Auto Input Change” or “System Standby”.

	Off	Condition : while the monitor is in Standby mode.
Auto Input Change		When the connected equipment starts (such as DVD
	On	playback and Disc insertion), the monitor is automatically
		turned On and switches the picture and audio to HDMI input.
System Standby	Off	Condition : while the monitor is On.
		When the monitor is switched off or set to Standby mode, the
	On
		connected equipment is also turned off or in Standby mode.
AV Center Control	Off	Selecting On will activate AV Center OSD interface, in case
	On	you purchased the optional Hitachi A/V Center.

NOTE

If the HDMI-DVI cable is used, this HDMI-interfaced system is not available.

Connecting to Equipment Having Video Output Terminals

The unit can be connected to equipments having video output using the optional D-sub 15 pin - composite cable.

IN OUT [Example]

AUDIO

(Audio)

(D-sub 15 Pin)

	VCR
	or
	DVD player
*	Set-Top Box

Camcorder

*Optional D-sub 15 pin - composite cable.

Home video game system

NOTE

About the connection of D-sub 15 pin, see 13 for details.

19