Hitachi UT32A302W Cleaning and Maintenance, SAFETY PRECAUTIONS continued, English, Viewing Advice

SAFETY PRECAUTIONS (continued)

CAUTION

■Do not install the unit in locations where it will be subjected to high temperature.

This could damage the cabinet or components of the product.

Do not install near any heat sources such as radiators, heating grilles, stoves, or other apparatus that produce heat.

Keep the unit out of direct sunlight. Otherwise the resulting increase in temperature of the unit may cause a malfunction.

■Viewing Advice

The lighting of the environment in which the product is used should be appropriate. Too bright/dark environments are not good for your eyes.

Take time to relax your eyes occasionally.

When you use the product, view from a distance equal to 3 to 7 times the height of the screen. This is the best viewing distance in order to protect your eyes against eyestrain. Example: (3X)= approx: 1.5m (4'), (7X)= approx: 3.5m (9').

Adjust the volume to an appropriate level, especially during night time.

■Transporting the product

When the product needs to be transported due to moving or repair, use the carton box and buffer material that came with the product.

Always transport the product upright; otherwise this could damage the LCD panel.

Avoid laying the product down on its face or back.

Avoid vibrations. If the product "must" be transported laying on its face, be sure to provide soft cushioning material.

■Keep radios away from the unit while in use.

The unit is designed to meet the international EMI standards to prevent radio interference. However, the unit may generate noise in the radio.

If noise is heard on the radio, please try the following actions.

Adjust the direction of the radio antenna in order not to receive interference from the unit. Keep the radio away from the unit.

■ Infrared communication devices

Infrared communication devices such as cordless microphones or cordless headphones may not operate properly around the unit. This is because of communication failure. Please note that this is not a malfunction.

■When you dispose of the product at the end of its service lifetime, follow the regulations in your residential area.

For more information, contact the local authority or the dealer where you purchased the product.

Cleaning and Maintenance

Please make sure to unplug the power cord before cleaning the unit.

■How to clean the LCD panel of the unit.

Wipe the panel with a lint-free and dry cloth in order to prevent damage to the panel surface.

Do not use a chemical cloth or cleaners. Depending on the ingredients, these may cause discoloration and damage to the panel

surface.

Do not wipe with a rough cloth or rub hard. This may damage the panel surface.

In case of greasy dirt such as fingerprints, wipe the panel surface with a lint-free cloth moistened with a diluted neutral detergent solution (dilute 1 part of detergent to 100 parts of water), and then wipe with a soft and dry cloth.

Do not use a spray cleaner. This could cause a malfunction.

■How to clean the cabinet of the unit.

The following may cause cracking, deformation and peeling of paint.

Do not wipe the cabinet with benzene, thinners and other chemical products. Do not spray volatile solutions such as insecticide over the cabinet.

Do not leave the cabinet in prolonged contact with plastic or rubber materials.

Do not use a chemical cloth, cleaner or wax. Depending on the ingredients, these may cause cracking and deformation.

Use a lint-free cloth (e.g. cloth for cleaning glasses) to clean the cabinet and control panel of the unit. In case of the excessive dirt, wipe with a soft cloth moistened with a diluted neutral detergent solution and then wipe with a soft and dry cloth.

Never use the following detergents. They could cause cracking, discoloration and scratching.

Acidic/alkaline detergents, alcoholic detergents, abrasive cleaners, soap powder, OA cleaner, car wax, glass cleaner, etc.

ENGLISH

8