SETUP OPERATION

How to Use the Remote to Control your External Devices

OPERATING THE PRECODED FUNCTIONS FOR YOUR EXTERNAL DEVICES.

The new remote control is designed to operate different types of VCRs, cable boxes, set-top-boxes, satellite receivers, DVD players, and other audio/video equipment. You must first program the remote to match the remote system of your external equipment (refer to pages 29 ~ 30 for precodes).

EXTERNAL DEVICE CONTROL SETUP PROCEDURE

1.Turn on your external device.

2.Select the desired device mode DVD, PVR/VCR, SAT/CBL or AVR by pressing the corresponding device button.

3.Hold down the device button (DVD, PVR/VCR, SAT/CBL or AVR) on the remote and enter the four digit preset code that matches your device as shown on pages 29 ~ 30 .

4.Release the device button.

5.If done correctly, the device LED indicator will blink 3 times to confirm proper setup.

6.The remote will now control the desired device.

SETUP EXAMPLE (Hitachi Cable Box with precode 0003)

1.Turn ON your Cable box.

2.Select Cable mode by using your SAT/CBL button to position the LED indicator on SAT/CBL.

3.Hold down the SAT/CBL button on the remote and press the numbers 0, 0, 0 and 3.

4.Release the SAT/CBL button.

5.The indicator light will flash 3 times if the code was accepted.

6.Aim the remote at the cable box and press the POWER button. The remote will turn off your cable box when the correct four digit preset code is entered. When this occurs, the remote control is programmed for your cable box. If the cable box does not turn off, try a different four digit preset code.

7.The remote will now control your Cable box.

Repeat the same procedure for your set-top-box or satellite receiver (select SAT/CBL), your DVD (select DVD), your VCR/PVR(select VCR/PVR), or your AVR (select AVR).

NOTE

Power button

Device buttons

Numeric buttons

Remote Control Backlight Feature

When you press any remote control button, the buttons will light up. The illumination will light a few seconds during this time. The buttons will appear to light if the

room is dark.

Disabling Remote Control Backlight Feature

1.Place the RC in TV mode.

2.Press and HOLD the TV mode key.

3.While holding the TV mode key enter ASPECT, MUTE in sequence.

4.To re-enable the backlight feature do steps 1~3 again (these steps toggle the Backlight Feature on and off, default is ON).

If your external device cannot be operated after performing the above procedures, your external device code has not been precoded into the remote.

In the unlikely event that your external device cannot be operated after performing the above procedures, please consult your external device operating guide.

The remote control will remember the codes you have programmed even after the batteries are removed from the remote control. To reset all programmed codes to factory default place remote control in TV mode, then press and hold TV mode key and enter “9”, “8”, “1” in sequence.

25

Page 26
Image 26
Hitachi UT32A302 Setup Operation, How to Use the Remote to Control your External Devices, Remote Control Backlight Feature

UT32A302, UT32A302W specifications

The Hitachi UT32A302W and UT32A302 are advanced flat panel LCD televisions that stand out in the competitive market of home entertainment. Combining cutting-edge technology with aesthetic design, these models are designed to enhance the viewing experience while providing reliable and efficient performance.

One of the key features of both models is their high-definition display capabilities. With a resolution of 1366 x 768 pixels, the UT32A302W and UT32A302 deliver sharp and vibrant images that bring movies, television shows, and video games to life. Whether you’re watching a thrilling action sequence or a serene landscape, the picture quality remains outstanding.

In terms of connectivity, both televisions come equipped with multiple HDMI inputs, allowing users to connect various devices such as gaming consoles, Blu-ray players, and streaming devices effortlessly. Additionally, they include USB ports for easy access to multimedia files, facilitating a seamless viewing experience from personal devices.

The Hitachi UT32A302W and UT32A302 also boast innovative technologies that enhance the overall performance. With a high contrast ratio, these televisions render deeper blacks and brighter whites, which significantly improves the viewing experience, especially in low-light conditions. The advanced color enhancement technology ensures that images are displayed with excellent accuracy, providing a more immersive experience.

Energy efficiency is another highlight of these models. They are designed to minimize power consumption without sacrificing performance, making them an eco-friendly choice for consumers. The slim design and lightweight structure allow for easy installation, whether mounted on a wall or placed on a stand.

User-friendly features such as an intuitive remote control and on-screen menus make navigating through settings and channels a breeze. The televisions also support various formats and codecs, enabling users to enjoy a wide array of content without compatibility issues.

In summary, the Hitachi UT32A302W and UT32A302 are strong contenders in the television market, offering high-definition display quality, versatile connectivity options, and advanced technologies that elevate the viewing experience. They are ideal for anyone looking to upgrade their home entertainment system with reliable and stylish options.