AUTOMATIC DATE RECORDING
8.After setting AM or PM, press "DATE/TIME" button to change the display and start the internal clock. It is recommended that you press "DATE/TIME" button to match the time signal.
9.Press "DATE/TIME" button after setting the clock. The display will change as follows each time the button is pressed.
NOTE: The date/time graphics will be recorded whenever they appear in the viewfinder.
To correct date/time information after starting the date/time
1.Press and hold "DATE/TIME" button, and then press "STOP/EJECT" button. The month starts flashing.
2.Correct the incorrect digit by using "F.FWD", "REW" and "STOP" buttons.
To correct date/time information during programming
Press "STOP/EJECT" button repeatedly until the digit that is incorrect flashes. Correct the incorrect digit by using "F.FWD", "REW" and "STOP/EJECT" buttons.
AUTOMATIC DATE RECORDING
This feature records the date automatically once a day. After you begin recording, the date is recorded automatically for 10 seconds. The same date is recorded again in the following cases.
When the cassette is replaced.
When "
" is displayed again after being switched to the date display.
When the recording is for less than 10 seconds.
26