EYEPIECE ADJUSTMENT

NOTES:

￿Do not touch the lamp directly with your fingers. It may shorten its service life.

￿When the lamp is replaced, or when the front case of the camera light is removed, make sure the front case is attached to the camera light properly.

￿Consult your nearest service center to replace the lamp.

EYEPIECE ADJUSTMENT

To use the electronic viewfinder without eyeglasses on, adjust the diopter control for optimum focus adjustment.

VIEWFINDER BRIGHT, COLOR AND TINT CONTROLS (For VM-2800A/3800A)

You can adjust the viewfinder brightness, color and tint as required.

"BRIGHT" Control

Viewfinder brightness can be adjusted by turning the "BRIGHT" control. This does not affect the picture actually recorded by the camcorder.

"COLOR" and "TINT" Controls

The small "COLOR" and "TINT" controls are set at the factory and should require no adjustment. If they ever require adjustment, use a plastic screwdriver. Make the adjustments with caution to prevent damaging the miniature controls.

55