TROUBLESHOOTING

CAMERA RECORDING

 

 

Symptom

Check Point & Correction

 

Picture does not appear in the

Remove the lens cap.

 

viewfinder.

 

 

 

 

`Slide the power switch to

 

 

“CAMERA”

 

 

 

Disconnect the AV input cable from

 

 

the camera/recorder.

 

The camera/recorder cannot go into

Check the record protect tab on the

 

the recording mode, even when the

cassette.

 

 

start/stop button is pressed.

 

 

 

 

Make sure that the “FOCUS M” does

 

 

not appear in the viewfinder. If it is

 

 

displayed, press “Focus” select

 

 

button to erase it.

 

 

Picture is out of focus.

Auto-Focus does not operate if a

 

 

special effects filter is attached.

 

NO OPERATION IS ACCEPTED

 

 

 

Symptom

Check Point & Correction

Power is turned on, but no button operations are

Remove the power source,

accepted.

and after about one minute,

 

push the reset switch gently

 

using a toothpick, etc. until

you feel a click. Since this

 

 

 

erases the date, time and

 

other customer preferred

features, reset them again.

 

 

PLAYBACK OF PRE-RECORDED CASSETTE

 

Symptom

Check Point & Correction

"PLAY" button cannot be engaged.

Set the "POWER" switch to

 

"VIDEO" position.

No picture

appears on television screen when

Set the television to the "PLAY" is pressed.

Camera/recorder channel

 

(3 or 4) depending upon the

 

selected channel on

 

 

(TV is connected to the camera/recorder

RF channel select switch

by

using RF converter unit.)

of RF converter unit. Set

 

"AV IN/OUT" switch to

 

57