Hamlin | 4 |
Zenith | 5 |
Scientific Atlanta | 6 |
Pioneer | 7 |
Philips | 8 |
To operate the cable box once the remote is programmed for it:
Press CATV and then the button of the function you want.
Press VCR to operate your VCR with the remote again.
Advanced Operations (Second VCR)
Integrating a Second VCR
With another VCR hooked up, you can copy videotapes as needed, and you can get fancy with multimedia programming. For this discussion, we refer to the model VT- M181A Hitachi as VCR2 and the other unit as VCR1.
Hookup
To hook up a second VCR, you need:
A video cord with a single jack on each end, and
An audio cord with a single jack on each end, or
A
Study the back of VCR2
Connect VIDEO OUT on VCR2 to the yellow VIDEO IN on VCR1.
Connect the AUDIO OUT jack on VCR2 to the AUDIO IN jack on VCR1.
Illustration of Hookup
To Control Both VCRs with the Remote Control
If the second VCR that you've hooked up is also a Hitachi, you can set your remote to operate both VCRs.
Press GUIDE, then press 4 to bring up the Setup screen.
The default setting on the Setup Screen is VCR1, for when you have only one VCR running.
Press 2 to set VCR CODE to VCR2.