KitchenAid KERS507 warranty Using auto set, Place food in cold oven, Set Auto Set cycle

U sing and Caring for Your Oven

Using auto set

Auto Set lets you choose from among ten preset oven cooking cycles. These cycles store commonly used cooking times, cooking temperatures, and probe tempera-

ture settings. Auto Set saves you time by limiting the number of pads you have to press when cooking at a favorite setting.

1. Place food in cold oven.

If you need the Temperature Probe for your cycle (settings 5-8), insert probe into food. (Follow Steps 1-4 in “Using the temperature probe” on page 24.)

2. Set Auto Set cycle.

PRESS	AUTO	YOU SEE
	SET

DELAY	TIMED	ON
CLEAN	LOCKED
DEHYD	ROTIS	HR MIN	MIN SEC
START?		CLEAN START STOP TIMER

Press desired Number pad.

Example:

Example:

PRESS

1

YOU SEE

DELAY	TIMED	ON
CLEAN	LOCKED
DEHYD	ROTIS	HR MIN	MIN SEC
START?		CLEAN START STOP TIMER

(Use the “Auto set chart” on page 28 as your guide for selecting the correct cycle.)

NOTES:

•You can change the Auto Set cycle any time before pressing the Start/Enter pad by repeating Step 2.

•The cooking setting, time, or probe temperature will be displayed before you press the Start/Enter pad.

3. Start oven.

PRESS START

ENTER

NOTE: Cycles 1-4, 9, 0: To see the time when the Auto Set cycle will end, press the Stop Time pad. Cycles 5-8: To see the internal food temperature selected, press the Temp Probe pad.

When the Auto Set cycle is done, “End” and the time of day will show in the display. Four tones will sound, followed by one short tone every minute, until you open the door, remove the probe, or press the Cancel/Off pad.

Example

For Auto

Set 5:

YOU SEE

DELAY	TIMED	ON
CLEAN	LOCKED
DEHYD	ROTIS	HR MIN	MIN SEC
START?		CLEAN START STOP TIMER

Example:

YOU SEE

DELAY	TIMED	ON
CLEAN	LOCKED
DEHYD	ROTIS	HR MIN	MIN SEC
START?		CLEAN START STOP TIMER

27