KitchenAid KERS507 warranty Using and replacing the cooktop light, Replacing the cooktop light

Using and Caring for Your Cooktop

Using and replacing the cooktop light

The fluorescent light is on the top of the control panel. The cooktop light switch is on the control panel. Press it to turn on the cooktop light. Press it again to turn light off.

Replacing the cooktop light:

1.Unplug appliance or disconnect at main power supply.

	BROIL	CLEAN			ON
BAKE	• MAXI					CLEAN START	STOP
	•• ECONO
				START?
	CONVECTION	ROAST
	BROIL
BAKE
			DELAY/TIMED		CLOCK	OVEN
			START	STOP	SET	LIGHT
		TEMP		TIME
			TIME
AUTO		PROBE
SET

2.Flip up the top of the control panel.

If the cooktop light still does not work, you may need to replace the starter. The starter is a knob-shaped part located on the right side of the backguard, under the light bulb.

	BROIL	CLEAN			ON
BAKE	• MAXI					CLEAN START	STOP
	•• ECONO
				START?
	CONVECTION	ROAST
	BROIL
BAKE
			DELAY/TIMED		CLOCK	OVEN
			START	STOP	SET	LIGHT
		TEMP		TIME
			TIME
AUTO		PROBE
SET

3.Grasp the fluorescent tube at both ends. Turn the tube approximately 90° in either direction until both ends come out of the receptacles. Replace with a 20-watt cool- white fluorescent tube.

To remove and replace the starter, first remove light bulb. Push starter in and turn approximately 90° counterclockwise. Pull starter out of recessed area. You can find replacement starters at stores that sell fluorescent tubes.

4.Close the top panel. Plug in appliance or reconnect at main power supply.

14