SPECIAL PLAYBACK

•Use the remote control for the following procedure.

•Be sure to check that the "PWR." and the "VCR" indicators are both on.

•Turn on the TV and set the TV channel to 3 or 4. Now set the CH3/CH4 switch on the back of the VCR to match the channel selected on the TV.

.

AUTO REPEAT PLAYBACK

The VCR has the auto repeat function that allows you to repeat a tape indefinitely without touching the PLAY button. Make sure to insert a prerecorded tape.

1 Select main menu

Press MENU button until the main menu appears.

MENU

TIMER PROGRAMMING

→AUTO REPEAT [OFF] PICTURE SELECT

CHANNEL SET UP

CLOCK SET

LANGUAGE SELECT

2 Select "AUTO REPEAT"

Press the PLAY/ or STOP/ button to point to "AUTO REPEAT".

3 Begin Auto repeat playback

Press the F.FWD/ button so that [ON] will appear next to "AUTO REPEAT" on the TV screen.

When in Stop mode, Repeat playback mode will start automatically.

If the on-screen menu still remains, press the RESET/EXIT button to exit the menu.

•Once you select the Auto Repeat mode, it stays in effect even after you turn off the VCR.

•The COUNTER MEMORY button does not function if the Auto Repeat mode is set to [ON]. In this case, set the Auto Repeat mode to [OFF].

•To stop playback, press the STOP button.

TO EXIT THE AUTO REPEAT MODE

Repeat steps [1 ] to [2], Then, press the F.FWD/ button. [OFF] will then appear on the menu. Then, press the RESET/EXIT button to return to TV mode

Power failure: If there is a power failure for more than 30 seconds, Auto Repeat Playback will go to off.

PICTURE SELECT

This function enables you to select the picture quality of a tape.

•This selection must be done during playback.

1 Insert a tape into VCR Begin playback.

2 Select main menu

Press the MENU button until the main menu appears.

MENU

TIMER PROGRAMMING

AUTO REPEAT [OFF]

→PICTURE SELECT

CHANNEL SET UP

CLOCK SET

LANGUAGE SELECT

3 Select "PICTURE SELECT"

Press the PLAY/ or STOP/ button to point to "PICTURE SELECT".

4 Select your desired mode

Press the F.FWD/ button until your desired mode (NORMAL, SOFT or SHARP) appears on the TV screen..

•Once you select the Picture Select mode, it stays in effect even after you turn off the VCR.

•To stop playback, press the STOP button.

Power failure: If there is a power failure for more than 30 seconds, Picture Select will go to NORMAL.