VIDEO CASSETTE TAPE INFORMATION

This VCR will operate with any cassette that has the VHS mark. For best results, we recommend the use of high-quality tapes. Do not use poor quality or damaged tapes.

PRECAUTIONS

•Avoid moisture. Moisture condensation may occur on the tape if it is moved from a cold place to a warm place or vice versa. Before using a tape with these conditions, to avoid damage of the tape and your VCR, wait until the tape has warmed to room temperature and the moisture has evaporated.

•Avoid extreme heat, high humidity and magnetic fields.

•Do not tamper with the cassette mechanism.

•Do not touch the tape with your fingers.

TWO DIFFERENT TAPE SPEEDS

Before recording, select the tape speed from: SP mode (Standard Play) or SLP mode (Super Long Play).

The table below shows the maximum recording/playback time using T60, T120, or T160 tapes in each mode.

Tape Speed

Recording/Playback Time

 

 

 

 

 

 

 

Type of tape

TT16060

T120

T160

 

 

 

 

 

 

SP mode

 

1 hour

2 hours

2-2/3 hours

 

 

 

 

 

SLP mode

 

3 hours

6 hours

8 hours

 

 

 

 

 

INSERTING A CASSETTE

Insert the cassette in the direction as shown. Push in gently, but continuously, on the center-back of the cassette until it is drawn into the VCR.

The VCR will automatically turn on.

REMOVING A CASSETTE

1)In the Stop mode, press the STOP/EJECT button on the VCR. The cassette will be ejected.

2)Pull the cassette out of the cassette compartment.

3)Store the cassette in the case as shown.

ERASE PREVENTION

•You can prevent accidental erasing of a recording by breaking off the tab on the back edge of the cassette.

If you decide to record on the tape again, cover the hole with plastic

tape.