PROGRAM NUMBER | 1 | |
DATE | 05/04 | THU |
START TIME | 07: 30 PM | |
END TIME | 08: 30 PM | |
CHANNEL | 16 |
|
REC SPEED |
| |
10 Set the tape speed
Press the PLAY/
or STOP/
button until the desired tape speed appears. (Example: SP)
ONE TIME PROGRAM
PROGRAM NUMBER | 1 | |
DATE | 05/04 | THU |
START TIME | 07: 30 PM | |
END TIME | 08: 30 PM | |
CHANNEL | 16 |
|
REC SPEED | SP |
|
→ | SP |
|
| SLP |
|
11 Finish setting the program
Press the F.FWD/
button. Program 1 is now completed.
•To set another program, repeat steps [2] to [11].
•Press the RESET/EXIT button to return to original mode.
12 Set the timer
Press the POWER button to turn off. The "
" indicator on the display comes on.
• Please see "HINTS FOR TIMER RECORDING" for more information.
HINTS FOR TIMER RECORDING
•If there is a power failure or the VCR is unplugged for more than 30 seconds, the clock setting and all timer settings will be lost.
•If the tape runs out before the end time, the VCR will switch to the Stop mode immediately, eject the tape
and the VCR power will be turned off. The "
" indicator will flash.
•If a tape is not in the VCR or does not have the 
" indicator flashes and timer recording cannot be performed. Please insert a recordable tape.
•The TV that is connected to your VCR may be turned ON or OFF when the VCR is in the
TO CHECK THE AUTOMATIC TIMER PROGRAM.
1)Turn the power on.
2)Press the MENU button. The details of the your program appear on the TV screen.
| TIMER PROGRAMMING | |
→ 1 | DATE STA/END | CH |
05/04 07:30 PM | 16 | |
| THU 08:30 PM | SP |
3 | 05/11 10:00 PM | 125 |
| W THU 10:54 PM | SLP |
5 | 05/21 11:00 PM | 40 |
| DAILY 11:30 PM | SLP |
•If the program you wish to check is not on the screen, press the PLAY/
or STOP/
button until your desired program appears.
3) Press the RESET/EXIT button to return to original mode.
4) Press the POWER button to return to timer