MAINTENANCE

SERVICING

Should your VCR become inoperative, do not try to correct the problem by yourself. There are no user- serviceable parts inside. Turn off, unplug the power cord, and take the unit to our Authorized Service Center for servicing.

CABINET CLEANING

Wipe the front panel and other exterior surfaces of the VCR with a soft cloth immersed in lukewarm water and wrung dry.

Never use a solvent or alcohol. Do not spray insecticide liquid near the VCR. Such chemicals may cause damage and discoloration to the exposed surfaces.

HEAD CLEANING

Playback picture may become blurred or interrupted while the TV program reception is clear. Dirt accumulated on the video heads after long periods of use, or the usage of rental or worn tapes can cause this problem.

If a streaky or snowy picture appears during playback, the video heads in your VCR may need to be cleaned.

1. Please visit your local Audio/Video store and purchase a good quality VHS Video Head Cleaner.

2. If a Video Head Cleaner does not solve the problem, consult our nearest Authorized Service Center. Professional video head cleaning requires highly technical attention.

NOTES:

Remember to read the instructions included with the video head cleaner before use.

Clean video heads only when problems occur.

TECHNICAL SPECIFICATIONS

Format:

VHS

Video Signal System:

NTSC color EIA standard

Record/Playback System:

Video: 4 heads

Tape Speed:

33.35mm/s (SP), 16.67mm/s (LP)(Playback Only), 11.12mm/s (SLP)

RF Input:

UHF/VHF 75 ohm

Tuner:

181 channel tuning ability *(125 cable channels)

Type:

Auto programming frequency synthesis

Power Input:

AC120V 60Hz

Power Consumption:

12 W nominal

Cabinet Size:

14-1/4" (W) x 3-5/8" (H) x 8-3/4" (D)

 

36.0cm (W) x 9.2cm (H) x 22.3cm (D)

Weight:

5.3 lbs. (2.4 kg) (approx.)

Storage Temperature:

-4°F to 131°F

Operating Temperature:

41°F to 104°F

Accessories:

1 coaxial cable (Part No. 5857952),

 

1 remote control unit (Part No. HL11271), 2 AA batteries

* Check your cable company's compatibility requirements.

Design and specifications subject to change without notice.

If there is a discrepancy between languages, the default language will be English.