Hitachi Koki USA DH 22PB manual Anchor setting rotation + hammering

English

◯13 mm rotary hammer chuck

For drilling operations when using a straight shank bit for impact drilling with a rotary hammer.

Straight shank bit	)	13 mm Rotary hammer chuck
(for impact drill		(SDS-plus shank)

Chuck wrench

2. Anchor setting (rotation + hammering)

◯Anchor setting adapter (for rotary hammer)

Anchor setting adapter (SDS-plus shank) (for rotary hammer)

Overall length: 160, 260 mm

Anchor size

W1/4”

W5/16”

W3/8”

◯Anchor setting adapter (for manual hammer)

Anchor size
W1/4”
W5/16”
W3/8”
W1/2”	Anchor setting adapter
W5/8”	(for manual Hammer)

3. Large hole boring (rotation + hammering)

◯Center pin, core bit, core bit shank and guide plate.

(Guide plate) Center pin	Core bit		Core bit shank
			(SDS-plus shank)
Center pin		Core bit (outer diameter)		Core bit shank
–			25 mm
			29 mm
	(A)
			32 mm	Core bit shank (A)
Center pin (A)			35 mm
			38 mm
Center pin (B)	(B)		45 mm	Core bit shank (B)
			50 mm
Do not use core bits with	with guide plate
outer diameter of 25 mm	(The guide plate is not equipped with core bits
and 29 mm.	with outer diameter of 25 mm and 29 mm.)

7