Installation, Operation, and Care of
MODEL 2812 & 2912 SLICERS
SAVE THESE INSTRUCTIONS
GENERAL
The model 2812 and 2912 slicers are equipped with a 1⁄2 HP motor and are available for
The Power Interrupt feature, standard, requires the slicer to be manually
The Gauge Plate and Carriage Interlock feature, standard, prevents the Carriage Tray from being removed unless the Carriage is in the HOME position (pulled all the way to the front) and the Gauge Plate is CLOSED. When the Carriage Tray is tilted horizontally, the slicer will turn OFF if it has not previously been turned OFF. Once the Carriage Tray is tilted horizontally or removed, the slicer cannot be started and the Gauge Plate cannot be opened until the Carriage Tray is returned to its normal operating position.
The HomeStart feature, standard, requires the carriage to be in the HOME position before the slicer can be started.
If equipped with the AutoShutoff option, the slicer will turn off if a full stroke of the carriage has not been made within a 10 second interval. The AutoShutoff option is factory installed only.
The 2912 slicer features automatic slicing with six adjustable speeds.
A tubular food chute, 4" leg set and slaw tray are other available accessories for 2812 and 2912. The low carriage fence is an accessory on 2812; it is standard on 2912. A high carriage fence is an accessory used with front mounted meat grips. The standard meat grip is
Model 2812 Slicer | Model 2912 Slicer |
© HOBART CORPORATION, 1998 | – 2 – |