Hobart manual Model 5801 Meat SAW General

Installation, Operation, and Care of

MODEL 5801 MEAT SAW

SAVE THESE INSTRUCTIONS

GENERAL

The 5801 Meat Saw is rugged, durable, and easy to clean. The saw is equipped with a water resistant 3 HP electric motor and direct gear drive transmission that provides a blade speed of 3500 feet per minute. The carriage (Fig.1) has stainless steel ball bearings providing easy travel and dependability. The shaped front edge of the carriage is comfortable to the operator's body even when leaned on during movement. The carriage lock is standard. The upper pulley cover and baffle (Fig. 1) are standard in durable plastic, optional in stainless steel.

Table, carriage, pulleys, guides, and wiper assemblies can be quickly removed without tools for ease of cleaning. Moving parts are enclosed but accessible. The blade is guarded above and below the cutting zone. The pusher plate is provided to eliminate the need of handling items close to the blade; it can ride on the right "flanged-end" of the carriage so you keep your hands away from the cutting edge of the blade.

For electrical specifications above 250 volts, a transformer provides a 115 volt control circuit voltage. Thermal overload protection is an option.

One long-life blade is furnished with each saw as standard equipment. This blade cannot be resharpened; replacement blades are available through your local Hobart Service Office.

					UPPER PULLEY COVER (SST)
			SWITCH KNOB
					COLUMN GUARD
UPPER GUIDE AND GUARD
				SAW BLADE
	TABLE (LEFT)
					GAUGE PLATE
					TABLE (RIGHT)
		CARRIAGE
						GAUGE PLATE HANDLE
					LOCK LEVER
CARRIAGE LOCK
					LOWER COVER (SCRAP PAN)
					LEGS
					FEET

PL-40830-1

Fig. 1

© HOBART CORPORATION, 1995 – 2 –