FD3-150 FD3-200 FD3-300, Foodwaste Disposers

Item # _____________________________________

Quantity ___________________________________

C.S.I. Section 11400

	FD3-150 FD3-200 FD3-300
701 S Ridge Avenue, Troy, OH 45374		FOODWASTE DISPOSERS
701 S Ridge Avenue, Troy, OH 45374
1-888-4HOBART • www.hobartcorp.com

MEDIUM SIZE

FAST, ECONOMICAL

In a proﬁtable foodservice operation, there’s no space, time or budget allowance for inefﬁcient food waste handling. Here are the medium sized disposers that can end food waste storage, removal and clean-up – fast, economically.

SPECIFICATIONS

Listed by Underwriters Laboratories Inc. and meets requirements of A.S.S.E.Standard No. 1009 (50 Hz. Electrical Speciﬁcations not U L Listed).

MOTORS: Continuous duty rating, equipped with manual reset thermal overload inherent protection. Permanently lubricated ball bearings for upper and lower shaft support.

HOUSINGS: Heavy aluminum grind and discharge housings. Four bolts fasten the motor unit to the grind chamber, permit easy removal.

LEGS: Tubular stainless steel with bullet feet to support housing. Adjustable to 3 inches in either direction.

MOUNTING: All Hobart Disposers fasten to 7" I.D. (throat opening) cones. A vinyl isolating ring eliminates metal-to-metal contact at the cone mounting, reduces vibration and noise transmission.

STATIONARY SHREDDER RING: Abrasion resistant, Ni-Hard, 21⁄4" high, 4 machine ground primary action breaker bars, 42 secondary action grinding teeth.

FLYWHEEL: Offset breaker blade, mounted at center, speeds grinding, prevents objects from “riding” at center. Two hardened stainless steel cutter blocks (fastened to ﬂywheel with nylon locking screws) are replaceable, can be indexed for new cutting edges. Corrosion resistant Ni-Resist ﬂywheel is 73⁄16” diameter, slots undercut the shredder ring to assure that particles are cut to proper size before passing to the drain line.

MOTOR SHAFT SEAL: Face-type seal consists of sintered bronze mating ring and spring loaded carbon ring insert in chemical resistant neoprene bellows. Mating surfaces are protected from grit or ﬁbers by being recessed into ﬂywheel. Should any moisture pass this seal, a ﬂinger and drain tube are provided to insure immediate removal. In addition, a lip-type oil seal (located beneath the bearings) is an “added protection” water seal.

DRAIN CONNECTOR: The removable outlet ﬂange is tapped for 2” pipe connection.

DUAL DIRECTIONAL GRINDING: Hobart Disposers operate in either direction of ﬂywheel rotation. Direction of rotation can be controlled by the operator (to increase life and efﬁciency of grinding elements – back ﬂywheel free of a “jam”) when installed with Control Groups 2 or 3.

WEIGHT: Shipping – Approx. 95 lbs. (does not include accessory group or controls).