CLEANING

The dishwasher MUST be thoroughly cleaned at the end of each working shift.

Drain the machine by lowering the drain levers to a horizontal position. Drain levers are located near the floor at the front of each tank. Draining the tanks requires approximately 5 – 10 minutes.

Push POWER switch OFF. DISCONNECT ELECTRICAL POWER BEFORE CLEANING. Open all front access doors.

Remove the curtains. Clean the curtains. Using a good hose with spray nozzle, clean the load shelf and unload shelf by spraying debris into the machine (Fig. 12). Thoroughly cleanse and flush the dishwasher interior (Figs. 13 & 14).

Fig. 12

Fig. 13

Fig. 14

Remove the wash arms by first releasing the latches (Fig. 15). Slide upper arms forward, swinging front of arm down (Fig. 16). Remove the end caps (Fig. 17). Clean wash arms in a sink.

Fig. 15

Fig. 16

Fig. 17

Remove the flush arm at the load end of the machine (Fig. 18). Clean flush arm and nozzles in sink. Remove the strainer baskets (Fig. 19) and strainer pans (Fig. 20). Empty strainers in trash receptacle or food waste disposer. DO NOT STRIKE STRAINER PANS OR STRAINER BASKETS ON SOLID OBJECT TO DISLODGE DEBRIS. Scrub strainer pans and strainer baskets in a sink.

Fig. 18

Fig. 19

Fig. 20

– 5 –

Page 5
Image 5
Hobart FT900 SERIES manual Cleaning