Supplying Power to the Scale

Bench Receiving Scale

Power can be supplied to the scale through the AC adapter or optional batteries. The scale uses four (4) D-cell batteries not supplied by Hobart.

To insert batteries:

1.Open the front cover of the display by pulling the tab (located on the back right side of the display) toward you.

Tab

Mating

Terminal

2.Insert batteries using the imprinted diagram inside the battery case located on the inside front cover of the display head.

To use the power supply:

1.Connect the wall-mount adapter plug to a 120 V, 60 Hz, 1 Ph electrical outlet.

2.Connect the small, round 12V DC connector to the Mating Terminal (located on the left lower back corner of the display head).

☛

Note

When the scale is turned ON, all segments of the display flash approximately 5 times. Then, zero displays and the following indicators illuminate.

¥Zero

¥Stable

¥kg -- OR -- lb

¥Gross Wt.

Hobart HBR300 instruction manual Supplying Power to the Scale