Keypad, Operator Mode | Hobart HBR300 instruction

Bench Receiving Scale

Keypad

Operator Mode

You can use the 6-button keypad to perform functions in two modes:

¥Operator Mode

¥Setup Mode

In Operator Mode you can do the following using the keypad:

¥Weigh products

¥Operate one-touch tare

¥Weigh items in batches

¥Toggle between net and gross weight

¥Toggle between kg and lb

	ON	ZERO	TARE	NET	lb kg
	ON	FUNCTION		GROSS


		OFF
		CLEAR
		KEYPAD
Key		Function
ON		Turns the scale on or off.
		Turns the scale on or off.
	OFF

ZERO

Returns scale to zero when nothing is on the platter.

CLEAR

TARE

Operates one-touch taring and batch weighing.

NET

GROSS

Toggles between net and gross weight.

lb kg

Toggles between pounds (lb) and kilograms (kg).

7

Image 11

Hobart HBR300 instruction manual Keypad, Operator Mode

Contents

HBR300 Bench Receiving Scale Page Table of Contents Page FCC Note Verify Correctness of WeightIntroduction Look At This Tip Donõt Using the Scale Supplying Power to the Scale Leveling the Scale Adjusting the Display Head for Easy Viewing Over Indicator Illuminated Arrow IndicatesDisplay Head Display Keypad Operator Mode Key Function Setup Mode Operating the Scale Operating in Setup ModePresetting Tare Press Weight Limits Clearing a Preset TareSetting Upper and Lower Press Clearing Upper and Lower Limits Are Set Operating in Operator ModeUpper and Lower Weight Weighing a Product When Weighing in Batches Cleaning and Maintaining the ScaleCleaning Don’t SanitizingMaintaining Error Message Possible Cause Action Error Messages Accessory Mobile Cart Page 34220 Rev. a 2/99