Operation, Control Box Heaters, CONTROLS Fig

CONTROL BOX HEATERS

The Mixer-Grinder has a heater in the control box and another heater in the front control panel to keep the controls dry. They are automatically ON when the machine is electrically connected. The Mixer- Grinder should always be connected EXCEPT when performing assembly, disassembly, cleaning, or maintenance of the machine. After cleaning, reconnect the electrical power supply.

OPERATION

CONTROLS (Fig. 4)

MIX	STOP	MIX/GRIND	FOOT

START	FOOT SWITCH OFF	START	SWITCH

			ON

Fig. 4

MIX START Button— Starts rotating the mix arm. Use the Stop Button to stop mixing.

STOP Button — Turns the mixer-grinder off. Turns the Foot Switch off if it was on.

MIX/GRIND START Button — Starts rotating both mix arm and worm. Use the Stop Button to stop mixing and grinding.

FOOT SWITCH — When On, the Mix Start and Mix/Grind Start Buttons are inoperable and the accessory Foot Switch can be used to Mix/Grind ONLY. The indicator light shows when the Foot Switch is On. Push the STOP Button to turn the Foot Switch Off.

HOPPER LID INTERLOCK — An interlock switch requires the hopper lid to be closed before the machine can operate. Raising the hopper lid opens the electrical circuit and makes the machine inoperative.

LATCH

HOPPER LID