3-5. Sensitivity Control
1 Sensitivity Control
Weld Mode
Use control to make the lens more respon- sive to different light levels in various weld- ing processes. Use a
130−50% sensitivity setting for most ap-
plications.
| It may be necessary to adjust helmet sensi- |
| |
| tivity to accommodate different lighting con- |
| |
| ditions or if lens is flashing On and Off. Ad- |
| |
| just | helmet sensitivity as follows: |
|
| . Adjust helmet sensitivity in lighting con- |
| |
|
| ditions helmet will be used in. |
|
| S | Turn sensitivity control to lowest |
|
|
| setting. |
|
| S | Press Reset button to turn helmet On. |
|
|
| Helmet lens will darken twice and then |
|
|
| clear. |
|
| S Face the helmet in the direction of use, |
| |
|
| exposing it to the surrounding light con- |
|
|
| ditions. |
|
| S Gradually turn sensitivity setting clock- |
| |
|
| wise until the lens darkens, then turn |
|
|
| sensitivity control counterclockwise |
|
|
| until slightly past setting where lens |
|
|
| clears. Helmet is ready for use. Slight |
|
|
| readjustment may be necessary for |
|
|
| certain applications or if lens is flashing |
|
|
| on and off. |
|
| Grind Mode |
| |
| . Do not weld in the Grind mode; the lens |
| |
|
| will not darken. |
|
| To use the Grind mode, turn the Sensitivity |
| |
| control clockwise to the far right position |
| |
| (Grind). To resume welding, return the con- |
| |
| trol to the desired sensitivity setting. |
| |
|
|
| |
|
|
| |
Recommended Sensitivity Settings |
| ||
|
|
| |
Stick Electrode |
| ||
|
|
| |
Short Circuiting (MIG) |
| ||
|
|
| |
Pulsed & Spray (MIG) |
| ||
|
|
| |
Gas Tungsten Arc (TIG) |
| ||
|
|
| |
Plasma Arc Cutting/Welding |
| ||
|
|
| |
Grind Mode | Grind Position − Far Right (Clockwise) |
| |
|
|
|
|
