Up/Down Control Assembly
The following is a detail of how the up/down rud- der control is set up inside the kayak.
Pull more of this line to get more DOWN tension.
The down control line passes around the block mounted on the inside of the hull
Up/Down Handle
ABungee cord fits is attached to the down control line and fits around the control arm post.
Control Arm
Down Control Line
Pull more of this line to get more UP tension.
Up Control Line
Steering Control Trim
In order to have a good, responsive feel to the steering, you may have to adjust the tension of the steering lines from time to time. Follow the diagram to the right for tuning the steering lines.
These two screws hold the end of the line in place. Turn back the screw a couple of times to release the end of the line and tighten the screws back down to hold the line.
Pull more of this line and wrap it around the screw to trim your boat to the left.
Pull more of this line to trim your boat to the right.
6
