Hoist Fitness 0600-001 ASSEMBLY INSTRUCTIONS Page 27

ASSEMBLY INSTRUCTIONS Page 27

Links, Pull-Pins, Snap Locks, Swivels, Weight Stack Pins:

Upholstery:

Guide Rods:

Decals:

Nuts and Bolts:

Belts and Cables:

Checkall pieces for signs of visible wear or damage.

Checksprings in snap hooks and pull-pins for proper tension and alignment.

Ifthe spring sticks or has lost its rigidity, replace it immediately.

Toensure prolonged upholstery life and proper hygiene, all upholstered pads should be wiped down with a damp

clothafter every workout.

Periodicallytake the time to use a mild soap or an approved vinyl upholstery cleaner to deter the onset of cracking or

drying.Avoid using any abrasive cleaners or cleaners not intended for use on vinyl.

Replaceripped or worn upholstery immediately.

Keepsharp or pointed objects clear of all upholstery.

Wipeclean with a clean, dust free rag.

Iflubrication is required, lube with ordamage to the Top Weight Bearing may occur.

DONOT repeatedlyclean the shafting with alcohol or any other stripping cleanser! TheTop Weight Bearing

transfersa gliding material to the guide rods. Cleaning other than wiping with a clean, dust free rag willremove the

previouslytransferred material and increase the wear to the Bearing Liner.

Inspectand familiarized yourself with any safety warnings or other user information posted on each decal.

nspectall nuts and bolts for any loosening and tighten if needed.

Gothrough a re -tightening sequence periodicallyto ensure that all hardware is tensioned properly.

Hoistuses only high quality belts, and mil- spec cables.

Visuallyinspect the belts and cables for fraying, cracking, peeling or discoloration.

Whilethe machine is not in use, carefully run your fingers along the belt or cable to feel for thinning or bulging

areas.

Replacebelts and cables immediately at the first signs of damage or wear. Do not use equipment until belts or cables

havebeen replaced.

D200

Lat Pulldown

Mid Row