WEIGHT STACK ASSEMBLY
Step 2d
1 - Weightframe Upright
2 - TopPulley Mount
3 - WeightStack Mount
6 - FrontUpright
13 - Guide Rod TopMount
14 - Latch Assembly
15 - Guide Rod
22 - 20 lb. Intermediate Weight
23 - 12 1/2 lb. Intermediate Weight
24 - 8 1/4 lb. TopPlate
Part Descriptions
C - 1/2”-13UNC x 3 1/4” Hex Head Bolt (WZ)
G - 3/8”-16UNC x 3/4” Square Head Set Screw
U - 5/16”-18UNC x 5/16”-Scocket Set Screw
AA - 1/2” Washer
BA - 1/2” Nylok Nut
CH - WeightStack Bumper
CK - Latch Spring
CL - Latch Pin
CM - C-Clip
Hardware Descriptions
Page - 11 HD1700 Assembly
OWNERS
MANUAL
Continue assembly by attaching (14) and (CK) to (6). Now slide (15)
through (CH) and slide them both into (3). Tilt both (15)’s forward
enough to allow room to slide the WeightPlates on. Slide all 10 (22)’s and
all 5 (23)’s onto both (15)’s. Now slide (24) onto both (15)’s. Slide (13)
over both (15)’s. Angle both (15)’s vertical and secure (13) to both (1) and
(2). Secure both (15)’s to (13) using set screw (U). bolts.Wrench Tighten