Hoist Fitness HD1700 owner manual Bearing Housing Bracket Handle Weldment

OWNERS

M A N U A L

Step 2e

F R A M E A S S E M B L Y

Continue assembly by inserting (CP) into (CN). Then attach both to (27). Now attach (27) to (16). Insert (CB) into (12) and attach (16) to

(12). Wrench Tighten bolts. NOTE: Check to see that the Handle Weldment and U-Bracket rotates freely. If not, turn back the nut on the bolt for the axle just enough so that the Handle Weldment and U-Bracket rotates freely.

Part Descriptions

12 - Bearing Housing

16 - U-Bracket

27 - Handle Weldment

Hardware Descriptions

H - 1/2”-13UNC x 3 1/2” Hex Head Bolt (WZ) J - 5/16”-18UNC x 1” Button Head Bolt (WZ)

AA- 1/2” Washer AC - 5/16” Washer

AF - 5/16” Lock Washer BA - 1/2” Nylok Nut

CB - 25.4mm dia. x 63mm lg. Axle CN - Handle

CP - 25.4mm dia. x 148mm lg. Axle CQ - 3/4” Thrust Washer

CR - 3/4” Thrust Bearing

Page - 13 HD1700 Assembly