Icom AP-12 instruction manual When no access point is found

3 FIXED IP ADDRESS SETTING

3-2 Using [Easy Setting Wizard] (continued)

tClick <Next> to start searching the AP-12.

Click

yClick the desired access point name you want to set up, then click <Next>.

•The default IP address is [192.168.0.1]. However, once the AP-12 has been con- nected to a LAN with a DHCP server, a different IP address may be obtained.

1.Click

2.Click

The IP address of the AP-12 ap- pears.

When no access point is found:

When the error dialog “Cannot connect to the access point” appears after approx. 30 sec.

➥Check the connection between the AP-12 and the PC. (p. 16)

➥The network part may be different between the AP-12 and the PC in case the access point has been used with the fixed IP address. Refer the Chapter 7-4 (p.

61)in such a case.

18