Icom instruction manual AP-12 Manager Setting Screen, To exit AP-12 Manager

2 OBTAINING AN IP ADDRESS FROM THE DHCP SERVER

2-3 Starting [AP-12 Manager] (continued)

■[AP-12 Manager] Setting Screen

After installing [AP-12 Manager], the following screen appears first. q to r are common buttons in the [AP-12 Manager] screen.

q w e r

q<Restore default>

Restores all the contents of the screen to the default settings.

The AP-12 searches the DHCP serv-

er and sets an IP address obtained from the server.

See Chapter 3 to restore completely.

w<OK>

Registers the value or condition of all contents in the screen to the AP-12 and closes the screen.

e<Cancel>

Cancels the value or condition of all contents registration in the screen and closes the screen.

r<Apply>

Registers the value or condition of all contents in the screen only. The screen is kept open.

To exit [AP-12 Manager]

Move the cursor on the icon in the task bar then right-click. Select “Exit” in the menu that appears.

14