Icom AP-12 LAN interface, Transmission rate, User interface, System requirements

	REFERENCES 7
• LAN interface	: Ethernet plug (Type RJ-45)
	Based on IEEE802.3/10BASE-T
• Transmission rate	: 10 Mpbs
• User interface	: Status indicators (Power, Wired LAN,
	Wireless LAN)
• System requirements	: PC/AT compatible computer
	Windows XP/Windows Me/Windows
	2000/Windows 98 or Windows 98 SE.

*The stated specifications may be subject to change without notice.

*The transmission range may vary depending on the transmission speed and the environmental conditions.

■Specifications for Ethernet Plug

				Modular plug type RJ-45 (8-pin) ⋅1
				1.	Sending (+)	2.	Sending (–)
1	2	3	4 5 6 7 8	3.	Receiving (+)	4.	Not used
				5.	Not used	6.	Receiving (–)
				7.	Not used	8.	Not used

* The stated specifications may be subject to change without notice.

■Wireless LAN for the AP-12

To communicate with the AP-12, the PC must be installed with Icom’s Wireless LAN products for 11 Mbps.

•WEP security function is available with use during communication between Icom products.

•Bridge Mode is not available except with Icom products.

•When functional mode is Bridge Mode B, select the AP-12 as the access point.

7

69