ESS ID is changeable later. See p for details | Icom AP-12 specification

FIXED IP ADDRESS SETTING 3

!4Set the ESS ID, then click <Next>.

The default ID (LG) is used in this example.

•The AP-12 can communicate with the unit in which the same ESS ID as the AP- 12 and wireless LAN card is set.

•Click <Next> without changing the ESS ID, if desired.

The ESS ID is changeable later. See p. 33 for details.

Click

!5Set the channel number, then click <Next>.

The default channel (11) is used in this example.

•The same channel should be selected for the Bridge A or C operation.

•Click <Next> without changing the channel, if desired.

3

The Channel is changeable later. See p. 33 for details.

Click

23

Image 37

Icom AP-12 instruction manual ESS ID is changeable later. See p for details

Contents

AP-12 Page About exchanging the AP-12 or the PC connected to the AP-12 Introduction Foreword Features AP-12 Following notational conventions are used in this manual General Precautions Accessories Table of Contents IP Configuration …………………………………51-56 Safety Precautions Rcaution AC adapter General PrecautionsPage Installation location …………………………………………………………………7 Wireless functional modes …………………………………………………………2About the Ethernet card ……………………………………………………………8 Access point mode default Wireless functional modes About a MAC address Unit description Accessory attachment AC adapter Ethernet cable To avoid interference Examples of recommended installation Installation locationExamples of installation not recommended Installation precautions Desktop PC About the Ethernet card Chapter Procedure Connecting to a LANAbout Dhcp server detection Click Installing AP-12 Manager Click Finish Installation is now completed About AP-12 icon Starting AP-12 Manager To exit AP-12 Manager AP-12 Manager Setting Screen Fixed IP Address Connecting to the PC Using Easy Setting Wizard When no access point is found About IP Address Enter Click Easy Setting Wizard will restart automatically Click Next 0Click Next Select Click ESS ID is changeable later. See p for details 7Click Finish Installing AP-12 Manager Click Finish Installation is now completed Displays the connected AP- 12’s IP address To exit the AP-12 Manager AP-12 Manager Settings screen Page AP-12 Manager screen descriptions …………………………………………32 AP-12 Manager screen descriptions Settings Be entered default LG Preferred Bssid Remote MAC Address Communication channels Hidden wireless terminals IP Configuration MAC security Wep Security Wep settings ……… Key generator …… WEP Key Setting Examples- 64-bit encryption Show Station Version Information Options MAC security Wep Security Default settings Uninstalling AP-12 Manager Setting Examples Access point mode Common settings Bridge mode a Peer-to-PeerFunctional mode Select Bridge Mode a Individual settings Common setting Bridge mode B Client ModeAP-12 1 and 2 settings Functional mode Select Bridge Mode B Preferred BSS ID All AP-12s settings Bridge mode C Multi-siteFunctional mode Page IP Configuration For Windows XP Click Enter For Windows 98/98SE/Me For Windows Click Glossary ……………………………………………………………………………70 Program Possible Cause Solution Troubleshooting Dhcp Verifying the connection to the AP-12 Connecting the AP-12 and HUBConnect to the Cross Port Connect to the Cascade Port Failure in searching for the AP-12 When using Easy Setting Wizard D When using AP-12 Manager Click Verify Set Click IP address confirmation Windows XP Procedure Windows 2000 Procedure Windows 98/98SE/Me Procedure Connection to the router type modem Wireless terminal preparation When communication has failed Connection to the router type modem ProcedureRouter Type Modem Specifications Transmission rate LAN interfaceUser interface System requirements Glossary BSS ID Basic Service Set-IDentifier 10BASE-T Memo Memo