Icom instruction manual Failure in searching for the AP-12

REFERENCES 7

7-4 Failure in searching for the AP-12

Manual IP address setting is necessary when no AP-12 is found (the following screen appears) using [Easy Setting Wizard] or [AP-12 Manager], even if the con- nection between the AP-12 and the PC is correct.

•The following screen may take 30 sec. or more to appear.

D When using [Easy Setting Wizard] D When using [AP-12 Manager]

Access point does not appear.

[Procedure]

qConnect the PC and the AP-12 directly using the supplied crossover cable.

NOTE: DISCONNECT THE PC FROM THE EXISTING LAN.

When the PC is connected to the existing LAN, the AP-12 searches the DHCP server and uses the IP address obtained from the server according to the

default setting.

wStart [AP-12 Manager] (p. 27). e Click <Set IP>.

•<Access point IP address setup tool> screen appears.

7

Click

61