SETTING EXAMPLE 5

5-4 Bridge mode C (Multi-site)

Set the AP-12 and the PC as in the network shown at right.

IP address of the PC should already be set. (See Chapter 2 or 3)

See Chapter 4 (p. 31) for [AP- 12 Manager] details.

Follow the instruction manual of the printer server when con- necting to the AP-12. Usually, a crossover cable is used.)

 

 

LAN terminal

 

 

HUB

 

To LAN

 

To LAN

AP-12

 

HUB

 

HUB

 

 

To LAN

 

AP-12

LAN terminal

 

AP-12

Printer server

 

Printer

All AP-12s settings

Set the following items in [AP-12 Manager] Settings screen. (pgs. 33, 34)

Channel:

Set the desired channel.

-Set the channel at least four channels apart to avoid interference if another AP- 12(s), operating on an other channel(s), are within the transmission area. (p. 35)

• Functional mode:

5

Select “Bridge Mode C.”

- Check the “Auto Rate Fallback” (“” appears) when communication is unstable.

49

Page 63
Image 63
Icom instruction manual Bridge mode C Multi-site, All AP-12s settings, Functional mode