Icom AP-12 instruction manual WEP Key Setting Examples- 64-bit encryption

AP-12 MANAGER 4

eWep keys ………… Select the desired WEP key number for data encryp-

tion.(default:1) The desired key number can be selected between the AP-12 and another AP-12 or terminal.

A key, generated by the key generator, is displayed in the text boxes. However, the desired keys in hexa- decimal numbers can be entered into the text boxes directly when no key generator is set.

The lower 40-bit (10 hexadecimal numbers) or the lower 104-bit (26 hexadecimal numbers) can be entered when 64 bits or 128 bits is selected, respec- tively.

-No key generator is displayed when the desired key is entered into the key text boxes directly.

-The same key content should be entered into the key number that is selected for another AP-12 or termi- nal, as shown in the example 1 and 2.

No communication is made when different contents are entered into the key number that is selected for another AP-12 or terminal, as shown in the example 3.

DWEP Key Setting Examples– 64-bit encryption

Example 1	Two-way communication
	enable
Example 2	Two-way communication
	enable

4

Example 3

Communication disable

NOTE: Above screens shows the condition before clicking <Apply>. The display returns to “00 00 00 00 00” after clicking <Apply>.

39