SAFETY PRECAUTIONS
RCAUTION
Failure to observe the precautions listed here could result in personal injury or property damage.
●Do not install the unit outdoors. Otherwise equipment failure may result.
●Do not place on a slanted or unstable surface.
Otherwise the unit may tilt over or fall, resulting in personal injury or equipment failure.
●Avoid installing in humid, dusty, or poorly ventilated locations. Otherwise equipment failure may result.
●Do not use in locations exposed to direct sunlight, close to heating or cooling ducts, or otherareas subject to severe fluctuations in temperature. Otherwise the unit may become deformed or discolored. Also, fire or equipment failure may result.
●Be sure to connect the cables cor- rectly as explained in this manual. Do not use any other connection arrangement.
Otherwise equipment failure may result.
●Avoid locations exposed to strong magnetic fields or static electricity and locations exposed to tempera- tures or humidity levels that exceed the specifications listed in the manu- al.
Otherwise equipment failure may result.
●Do not use close to radios or televi- sion sets.
Otherwise signal interference may occur.
●Do not drop or the unit or subject it to strong physical shock.
Otherwise personal injury or equipment failure may result.
●Do not stand, sit, or place heavy objects on the unit. Do not pinch the unit.
Otherwise the unit may be damaged.
●When thunder and/or lightning occur nearby, disconnect the AC adapter from the wall socket and do not use the unit. Also, discontinue such work as connecting cables, disconnecting cables, installation, or maintenance.
Otherwise fire or electric shock may result.
●Do not use in locations where con- densation is likely to occur. Avoid hastily moving the unit to a location where the humidity level is very dif- ferent because condensation may occur.
Otherwise the unit may become deformed or discolored. Also, fire or equipment failure may result.
If condensation occurs, dry the unit or allow the unit to remain in the same envi- ronment until it is completely dry before using it again.
●Disconnect the AC adapter from the unit when the unit will not be used for a long time.
Otherwise the unit may become hot and fire or equipment failure may result.
●Do not clean with paint thinner or ben- zene.
Otherwise the case material may degrade or the coating may peel. Clean with a soft cloth. When particularly dirty, dampen the cloth slightly with a neutral cleaning agent that has been diluted with water.
xi
