3Com TokenLink VelocityTM XL PCI Network Interface Card manual Click Next

Installing a 3C359 NIC Driver for Windows Environments 4-5

Installing a Driver for Windows 95 Version 950b, OSR2

Follow these steps to install the driver for Windows 95 version 950b, OSR2. It is assumed that you are already running Windows 95.

During installation, have the Windows 95 software accessible on diskettes, CD, or hard drive in case the installation utility requests files from the Windows 95 software library.

1Install the 3C359 NIC and start the computer.

Windows 95 detects the new hardware. PCI Token Ring Controller appears in the New Hardware Found dialog notice. The Update Device Driver Wizard dialog box appears.

2Click Next.

3Click Other Locations.

The Select Other Location dialog box appears.

4If you are using 3.5-inch diskettes, insert TokenDisk diskette #2 in the drive. If you are using the TokenDisk CD, insert it in the CD-ROM drive.

5At the prompt, enter the appropriate path for the drive containing your TokenDisk diskette or CD and the driver you want to install.

For example, use the following path to install the NDIS 4 driver (recommended) from the TokenDisk diskette:

a:\w98nt40

Use the following path to install the NDIS 3 driver from the TokenDisk diskette:

a:\w95nt351

If you are using the TokenDisk CD, substitute the appropriate drive in the path.

6Verify that the Update Device Driver Wizard dialog box lists 3Com TokenLink Velocity XL PCI Adapter, and click Finish.

Have the Windows 95 software accessible in case the installation utility requests files from the Windows 95 software library. Insert the appropriate diskette or CD if prompted to do so.