NOVELL NETWARE

3 ENVIRONMENTS

This chapter describes how to install a 3C359 NIC network device driver for various Novell NetWare network operating system environments.

Before you install a NetWare driver, make sure that the 3C359 NIC is inserted in the PC as described in Chapter 2.

Installing a DOS 16-Bit Client Driver

This section describes installing the DOS 16-bit client driver using two methods:

Automatically, using the 3Com AutoLink software utility

Manually, using a NetWare installation utility and TokenDisk diskette or CD

Installing a DOS 16-Bit Client Automatically

The 3Com AutoLink software utility automatically configures one 3C359 NIC and installs the DOS 16-bit ODI client network driver for NetWare 3.12 and 4.1x systems. This section describes running the AutoLink program.

AutoLink Software Functions

AutoLink software configures your PC as a NetWare DOS ODI client. The AutoLink installation utility performs the following functions:

Installs a DOS NetWare Universal Client Virtual Loadable Module (VLM) from TokenDisk diskette #1, or from the TokenDisk CD.

The AutoLink installation utility cannot be used to install multiple 3C359 NICs.

Modifies the CONFIG.SYS, AUTOEXEC.BAT, and NET.CFG files. (The previous versions of these files are renamed CONFIG.3CM, AUTOEXEC.3CM, and NET.3CM.)

Page 31
Image 31
3Com TokenLink VelocityTM XL PCI Network Interface Card Novell Netware Environments, Installing a DOS 16-Bit Client Driver