3Com TokenLink VelocityTM XL PCI Network Interface Card manual Installing a NetWare Server Driver

3-12CHAPTER 3: NOVELL NETWARE ENVIRONMENTS

Your NET.CFG file should look similar to the following:

LINK DRIVER TLNKPODI

Node Address 00608C112233

Frame Token-Ring MSB

Frame Token-Ring_SNAP MSB

The node address should be set to the UAA or the LAA. Modify and save the NET.CFG file if the node address and frame type are not correct.

3Remove the OS/2 Requester diskette and restart the PC.

This completes the procedure for installing the OS/2 client driver for NetWare.

Installing a NetWare Server Driver

This section contains information about installing the TLNKPODI.LAN NetWare server driver for the 3C359 NIC in the following environments:

■NetWare 3.12

■NetWare 4.1x

The driver and associated files are located in the \NETWARE\NWSERVER directory on TokenDisk diskette #1.

Driver Support

The TLNKPODI server driver is a high-performance NetWare 4.1x-compliant server driver. It can be used in the following environments:

■NetWare 4.1x servers

■NetWare 3.12 servers

■NetWare servers running SFT III in NetWare 4.1 (as an IPX link, not as a mirrored server link)

The term “NetWare 4.1x-compliant” server driver in this file means that the HSM (hardware-specific module, or server driver) meets the Open Data-Link Interface (ODI) 3.3 specification. Netware 3.12 servers using ODI 3.3 drivers need updated files from Novell. If you are installing the driver in a NetWare 3.12 server, download the LANDR9 and 312PTA.EXE files from Novell’s Web site.