3Com TokenLink VelocityTM XL PCI Network Interface Card manual Select Install

5-4CHAPTER 5: IBM ENVIRONMENTS

3Select Install.

You are prompted for the source of the NIF file.

4If you are using diskettes, insert TokenDisk diskette #2 in a drive (for example, drive A) and enter:

a:\ndis2\os2

If you are using the TokenDisk CD, insert it in the CD-ROM drive (for example, drive D) and enter:

d:\ndis2\os2

5When the Installation Complete message appears, select OK.

You are returned to the main menu.

6Select Configure in the MPTS dialog box.

7In the Configure panel, verify that LAN Adapters and protocols is preselected, and then select Configure at the bottom of the panel.

8In the Configure panel in the Network Adapters group box, select 3Com TokenLink Velocity XL PCI and click ADD.

You can edit parameter settings for the 3C359 NIC. Select the 3C359 NIC in the Current Configuration list box and click Edit. When you are finished with the parameter settings, click OK.

9In the Protocols list box, select the protocols used by your network application. Select each protocol and click ADD.

If you are not sure which protocols to use, select IBM IEEE 802.2 and IBM OS/2 NetBIOS protocol drivers or ask your network administrator.

The protocol drivers you have selected will appear under the NIC driver name in the Current Configuration list box.

You can edit parameter settings for the protocols. Select a protocol and then click Edit.

10When you have finished selecting and editing protocols in the Configuration panel, click OK.

11Click Close in the Configuration panel.